Car LED Hood Light Strip – Daytime Running Light for Safer Nighttime Driving, Waterproof 12V Strip
Car LED Hood Light Strip – Daytime Running Light for Safer Nighttime Driving, Waterproof 12V Strip
Couldn't load pickup availability
Why you'll love it
- dynamic scan start-up effect creates a premium, eye-catching animation that makes the car stand out
- super glue adhesive backing allows tool-free installation in the hood gap without drilling
- silicone waterproof construction holds up to rain, car washes, and engine heat for long lifespan
- universal 12V fit works on cars, SUVs, trucks, and vans without model-specific compatibility worries
- three color options (Ice Blue, Red, White) let buyers match their vehicle's style or mood
Perfect for
- decorate vehicle hood with animated LED scan start-up effect for show-car appeal
- add daytime running lights to increase nighttime visibility and driving safety
- customize truck or SUV front end with under-hood accent lighting
- install as turn signal or pedal accent lighting for added style
- reuse strip for home decoration in game rooms or man caves
-
About Goodream
Goodream is the sole authorized seller of Xinshuo in US marketplace on Amazon platform. We are devoted to auto parts and home decor. We trust the power of users and work hand in hand with our users to improve the quality of life.
Any issues, please contact. And you will receive a response within 24 hours.
-
led car lights
-
car led strips lights
Product Information
Brighter LED Beads: This car hood light strip is built with 5050SMD high quality lamp beads, super brightness. Cool Car Accessories: This led car lights has dynamic Scan Start-up Effect and it will make your car even cooler. In addition, with an eye-catching light, the led lights exterior can increase the lighting of the car at night, ensure your travel safety. High Quality Material: Hood light strip is made of silicone, non-heating elastic material. It can be bent at your will and has a long lifespan. Soft and safe. Easy to Install: Car hood led strip with super glue on the back, which is strongly sticky. It can be attached easily to the gap of the hood. The red wire is connected to ACC insurance, black wire is connected to the negative pole. The voltage requirement is 12V-14.5V DC (it is not allowed to exceed 14.5V, otherwise the fuse is likely to burn out). Wide Application: LED car strip lights is suitable for all cars and trucks. It can be used as car hood lights, car door lights, turn light, daytime running lights, pedal lights, etc., even can be used as home decoration.
Features & Specs Compatible with Vehicle Type Car, Pickup Truck, SUV, Sedan, Trailer, Truck, Van Voltage 12 Volts (DC) Light Source Type LED Form Factor Strip Auto Part Position Front Outside Connectivity Technology Bluetooth Fit Type Universal Fit Water Resistance Level Waterproof Includes Remote? No Additional details Color White Material Type ABS Plastic, Led, Silicone Measurements Item Dimensions 70 x 0.55 x 0.19 inches Number of Pieces 1 Light Source Length 70 Inches
Frequently Asked Questions
Does this LED strip really improve nighttime driving visibility?
Yes. The 5050 SMD high-brightness lamp beads function as daytime running lights along the front edge of the hood, adding an extra layer of forward illumination that helps oncoming drivers and pedestrians notice your vehicle in low-light, foggy, or rainy conditions.
Is this safer than leaving my headlights off during the day?
It is intended to complement, not replace, your headlights. The strip provides a secondary visible light signature at the front of the vehicle, which research shows reduces daytime collision risk by making cars more conspicuous, especially in shadow or glare conditions.
Will the strip cause glare for oncoming drivers?
When installed in the hood gap pointing forward, the light output is diffused by the silicone housing and aimed across the front of the vehicle rather than directly at eye level, minimizing glare for oncoming traffic while still increasing your car's visibility.
Is the wiring safe to tap into my vehicle's electrical system?
Yes. The strip runs on 12V-14.5V DC with ACC fuse-protected wiring. You connect the red lead to an ACC-switched fuse and the black lead to a chassis ground or battery negative. The fuse protection prevents electrical faults from affecting the rest of the vehicle.
Is the strip safe to use in rain, snow, and car washes?
Yes. The silicone waterproof housing is rated for outdoor vehicle exposure, so rain, road spray, snow, and automated car washes will not damage the LEDs or wiring when the connections are properly sealed.
Does the strip get hot enough to burn someone or damage the paint?
No. The 5050 SMD LEDs run cool relative to halogen or HID bulbs, and the silicone housing dissipates heat. It will not scorch the hood paint, deform the adhesive, or pose a burn risk during normal operation.
Will the strong adhesive damage my paint when removed?
The adhesive is designed to bond firmly to clean painted surfaces but can typically be removed with a light adhesive remover or heat from a hairdryer. When removed carefully, it does not strip clear coat on factory paint that is in good condition.
How does this compare to underbody neon glow kits for safety?
Front hood lighting is positioned where it actually helps other drivers see you, whereas underbody neon is largely decorative and can even be illegal in some regions. The hood strip delivers a genuine safety benefit while still offering custom styling.
Is this safer than installing a separate aftermarket driving light?
In some ways, yes. There is no drilling, no separate relay harness, and no risk of misaligned beams glaring at other drivers. The strip is low-voltage, fused, and integrated into an existing 12V circuit, which reduces installation mistakes and electrical risk.
What happens if the strip fails while I'm driving?
Because it is a passive lighting accessory fused through your ACC circuit, a failure simply means the strip stops illuminating. It will not affect your headlights, turn signals, or any other factory system, and you can drive normally until you replace the strip.
Can I leave the strip on overnight without draining my battery?
It is wired to ACC, so it powers off automatically when you turn the ignition off. You do not need to remember to switch it off, and there is no risk of parasitic battery drain overnight like there can be with hardwired accessories.
Will Bluetooth connectivity interfere with my car's electronics?
No. The Bluetooth module operates on standard 2.4 GHz and is isolated from critical vehicle systems. It only controls the LED strip, so it will not interfere with key fobs, infotainment, or driver-assist features.
Is the strip safe to touch right after running for hours?
Yes. The silicone housing stays comfortably warm, never hot, even after extended use. You can adjust or remove the strip at any time without waiting for it to cool down.
Does the scan start-up effect create any distracting flash for the driver?
The scan animation plays once at power-on, faces forward, and lasts only a few seconds. It is bright enough to be seen but not sustained long enough to distract you from the road during normal driving.
Is it safe to install this in a leased or financed vehicle?
Yes. The peel-and-stick installation is non-permanent and does not require drilling. When your lease ends, the strip can usually be removed with no visible modification, which is not the case with most hardwired lighting upgrades.
What if I accidentally short the wires during installation?
The ACC fuse will blow before any damage reaches your vehicle's electrical system, acting as a built-in safety. Replace the fuse with the same rating and re-check your wiring before reconnecting.
How do I install the LED hood light strip on my car?
Clean the hood gap with isopropyl alcohol and let it dry completely. Peel the adhesive backing and press the strip firmly into the gap along the front edge of the hood. Connect the red wire to an ACC-switched fuse slot in your fuse box and the black wire to a chassis ground or battery negative. Power on the ignition to test, then use the Bluetooth app to set your color and brightness.
How do I connect the strip to my phone via Bluetooth?
Power the strip on by turning the ignition to ACC, then open the Bluetooth settings on your phone. The strip will appear as a discoverable device; pair, then open the companion app to choose colors, adjust brightness, and trigger the scan start-up effect.
How do I remove the strip without damaging my paint?
Warm the adhesive with a hairdryer or heat gun on a low setting for 30 to 60 seconds, then slowly peel the strip back at a low angle. Any remaining residue can be removed with a dedicated adhesive remover or isopropyl alcohol. Wash and wax the area afterward.
Will this fit my car, SUV, truck, or van?
The 70-inch flexible strip fits the hood gap on most cars, SUVs, trucks, and vans. Because it is silicone and flexible, it can be routed along curves. Only exotic vehicles with very short or unusually shaped hoods may need a custom route.
Does it work with both 12V and 24V electrical systems?
The strip is rated for 12V to 14.5V DC, which matches standard gasoline car electrical systems. It is not designed for 24V systems found on some heavy-duty trucks and commercial vehicles, so verify your system voltage before installing.
What is included in the box?
The package includes the 70-inch flexible silicone LED strip, an ACC fuse-tap wiring harness, a Bluetooth control module, adhesive-promoter wipes, and a quick-start guide. No additional tools or fuses are required for a standard installation.
Is this strip safe to use in the rain or during car washes?
Yes. The silicone waterproof housing is rated for continuous outdoor exposure, including rain, road spray, and standard car washes. Make sure the wiring connections are properly seated and sealed for the best long-term waterproof performance.
How long will the strip last before I need to replace it?
The 5050 SMD LEDs are rated for tens of thousands of hours of use. With proper installation and care, most users get several years of service before noticing any drop in brightness or color consistency.
What is the difference between this LED hood strip and underglow or underbody neon lights?
Hood strips mount at the front edge of the hood where they can act as daytime running lights and front-end accents. Underglow is mounted under the chassis and is purely decorative, and in some regions is restricted or illegal for road use. A hood strip is generally more versatile, road-legal in more areas, and offers a real visibility benefit.
