Command Broom and Mop Gripper 3-Pack – Weather-Resistant Mount for Outdoor Shed Organization
Command Broom and Mop Gripper 3-Pack – Weather-Resistant Mount for Outdoor Shed Organization
Couldn't load pickup availability
Why you'll love it
- Leaves no holes, marks, or sticky residue on walls, making it renter-safe and ideal for fresh paint
- Strong 4-pound hold keeps mops and brooms from toppling over and cluttering floors
- Water-resistant 3M adhesive works in humid laundry rooms, garages, and outdoor sheds
- Tool-free installation means no drilling, anchors, or stud-finding required
- Grippers and strips are reusable with Command refill strips, providing long-term value
- Cleanly removes by pulling straight down, eliminating wall repair costs at move-out
Perfect for
- Wall-mounting brooms and mops off the floor in a cleaning closet or utility area
- Staging cleaning tools in a kitchen pantry or behind a door for grab-and-go access
- Damage-free organization in rental properties where drilling is prohibited
- Garage or shed storage to keep long-handled tools upright and visible
- Camper or dorm organization where space is limited and surfaces are delicate
Product Information
BROOM AND MOP HOLDER: One package includes six adhesive strips and three Command Broom and Mop Grippers that each holds a broom or mop up to 4 pounds with a 0.8- to 1-inch diameter handle EXTERIOR OR INTERIOR: Designed for versatile surfaces both indoors and outdoors, the 3M duct tape water-resistant backing withstands the harmful effects of moisture STRONG ADHESIVE: Secure bond from a strong adhesive makes this the perfect colored duct tape for crafts, bundling, taping cords, patching, reinforcing, labeling and organization SURFACE PREP: Clean with rubbing alcohol to remove grime and dust to allow the mop broom holder to bond to the surface; the indoor temperature must be between 50 degrees Fahrenheit and 105 degrees Fahrenheit USAGE TIPS: Wait seven days after painting before using Command Broom Gripper to allow the paint to cure; do not hang broom mop holder within 1 foot of sink/water or within splashing distance EASY CLEAN REMOVAL: Lightly hold the top of the wall adhesive strips and slowly pull straight down towards the floor to remove the hooks holding your mops and brooms during the holidays and prevent wall damage; reuse your hook again with refill strips REUSE WITH REPLACEMENT STRIPS: Reuse your hook and hardware again by purchasing Command Refill Strips
Command White Broom and Mop Grippers store your mops and brooms neatly off the floor when not in use without damaging surfaces. A great cleaning organizer, this wall broom holder sticks on a variety of smooth surfaces without leaving holes, marks or sticky residue. Mount these no damage wall hangers on painted walls, finished wood and more to enjoy the damage free hanging of your floor cleaning supplies. Perfect for home renovators and students, use these mop and broom grippers in your home, office or dorm to elevate the appearance of your space without tools, or even use them for camper organization and storage. To use, push your broom or mop handle into the Command Grippers for easy storage and pull it out when ready to use. Directions are included; follow them to use the wall mount broom and mop holder correctly. A clever organizing solution that doesn’t damage surfaces, these broom and mop holders will help you fearlessly change your space. One package contains three white grippers and six Command Strips. Each gripper holds a broom or mop up to 4 pounds with a 0.8- to 1-inch diameter handle. Decorate, organize and celebrate damage free with Command.
Frequently Asked Questions
Will the Command Broom and Mop Gripper 3-Pack hold up in an outdoor shed or covered patio?
Yes. The 3M water-resistant adhesive is engineered for humid and semi-exposed environments, including covered patios, sheds, and garages, as long as the surface is dry and within the recommended temperature range for application.
Can I use it in a camper or RV where walls are thin and delicate?
Yes. The adhesive is ideal for delicate RV and camper walls because it requires no drilling and removes cleanly, protecting the thin panel construction common in mobile interiors.
Does it work on a boat galley wall that sees humidity and temperature changes?
Yes. The water-resistant adhesive is designed to handle humid conditions, and the gripper is durable enough for galley storage as long as the wall surface is smooth and sealed.
Can I take it camping or move it between different outdoor setups?
Yes. Because the strips are removable and Command Refill Strips are available, you can re-mount the grippers in new locations as long as you use fresh strips each time.
Will the gripper stay secure on a garden shed wall that gets hot in summer?
Yes, when applied within the recommended temperature range and to a compatible smooth surface. The adhesive is designed to perform across normal seasonal temperature variations.
I live in a tiny home — will this help me save space in the kitchen and bathroom?
Yes. Mounting brooms and mops on the wall is one of the most effective space-saving strategies in tiny homes, and the no-drill design protects your interior walls.
Can I use it in a covered outdoor cleaning station by the patio?
Yes. As long as the mounting surface is smooth, clean, and dry, the water-resistant adhesive will hold up well in a covered outdoor cleaning area.
Will it work on a vinyl-sided shed or plastic outdoor storage unit?
It works on smooth, clean vinyl and plastic surfaces. For textured or corrugated siding, the adhesive will not bond properly, so a smoother mounting location is recommended.
Is it durable enough to handle tools moved in and out frequently during outdoor chores?
Yes. The 4-pound hold rating and stretch-release strip design allow for repeated daily use without losing grip strength, as long as the strips are properly applied.
How does this compare to a permanent screw-in hook for outdoor shed organization?
A screw-in hook holds more weight but requires drilling and leaves holes. The Command gripper offers strong, reliable hold with no permanent damage, which is better for rented sheds, RVs, and temporary setups.
Is it better than a freestanding broom rack for a camper or boat galley?
Yes. A freestanding rack shifts during travel and takes up floor space. A wall-mounted gripper keeps tools secure and stationary, which is critical in a moving vehicle or vessel.
How does it compare to magnetic holders for outdoor tool storage?
Magnetic holders only work on metal surfaces and won't hold non-magnetic handles. The Command gripper works on a wider range of smooth surfaces and secures handles by grip rather than magnetism.
Will extreme heat or cold weaken the adhesive outdoors?
The adhesive is engineered to handle a wide temperature range typical of indoor and covered outdoor environments. For prolonged direct sun or freezing conditions, follow the application guidelines on the package.
Can I use it in a humid greenhouse or potting shed?
Yes, in covered, well-ventilated greenhouses with smooth wall surfaces. For walls with heavy moisture contact, ensure the surface is fully dry at the time of application and reapplication.
Will the adhesive leave residue on my RV or camper walls if I remove it later?
No. When removed with the stretch-release method, the strips come off cleanly without leaving residue, protecting the value and finish of your RV or camper.
Is this a good option for a portable pop-up workspace or temporary outdoor setup?
Yes. It installs in seconds, removes cleanly, and can be re-mounted elsewhere with fresh strips, making it ideal for temporary and portable outdoor configurations.
How do I install the Command Broom and Mop Gripper on my wall?
Clean the wall with rubbing alcohol and let it dry completely. Separate the strip pairs, press one strip to the back of the gripper until you hear it click, remove the liner, press the gripper firmly against the wall for 30 seconds, then wait one hour before hanging any tool.
How do I remove the gripper without damaging the wall?
Grip the gripper firmly and slowly pull the strip straight down, stretching it along the wall until it releases. Never pull the gripper outward or at an angle, and do not use tools to pry it off.
Can I reuse the gripper after I remove it?
Yes. Replace the used Command Strips with fresh Command Refill Strips and remount the gripper on a new clean surface for continued use.
What handle diameters does the gripper fit?
The gripper is designed for handle diameters between 0.8 and 1 inch, which covers most standard brooms, mops, dusters, and other long-handled cleaning tools.
Will it stick to tile, wood, and painted drywall?
Yes. The 3M water-resistant adhesive is designed for smooth surfaces including painted walls, finished wood, tile, and similar flat finishes. It is not recommended for textured, porous, or delicate surfaces.
What is included in the box?
Each pack includes three broom and mop grippers and six 3M Command adhesive strips. Everything needed for installation is included, so you do not need to buy additional hardware.
How much weight can each gripper hold?
Each gripper holds up to 4 pounds, which is more than enough for most standard brooms, mops, and dusters when properly applied.
Is the adhesive safe to use in a child's room or nursery?
The adhesive is non-toxic once applied and does not emit fumes. It is safe for use in family spaces, but always install out of reach of young children and follow the package instructions.
How does a broom and mop gripper differ from a broom clip or wall hook?
A gripper uses a spring-loaded or rubberized cradle to securely hold the handle, while a wall hook only suspends the tool and can let it slip. A gripper provides a more secure, stable hold that prevents tools from sliding off.
